26" inch Rear 48V 500W Gear Hub Motor Rim Electric Bike Conversion Kit ebike kit

  • $609.95
  • Save $59.05
Tax included. Shipping calculated at checkout.

Only 8 left!

* Wheel Size: 26'' Rear wheel (Suitable for tyre width size 1.50 to 2.25)
* Motor: 48V 500W Brushless gear hub motor in black colour
* Wiring method : Waterpoof wire connection system
* Battery range :+/-40km per power in pedal assist mode
* Full Speed: Up to 40 km/h
* Display: KT LCD5
* Controller : 48V 22A KT Brand Controller
* Riding mode: Thumb throttle electric assist mode /Pedal Assist mode
* Rear fork width requirement:135-142mm.
* Suitable for Disk Brake and V brake to use

Motor: High speed 48V 500W Rear hub brushless gear motor,Bending Magnet .More efficient
Brake levers: Aluminum alloy,Wuxing E-brake lever
Rim and spokes: P25DE Alloy double wall rim CNC sidewalls, with 12g stainless steel spokes
Controller: KT Brand .48V controller in controller box .Maximum current rate : 22±1A
Throttle: Thumb(Finger) Throttle ,Wuxing Brand
PAS Sensor: 8 Magnet
Display: KT LCD5;Show all basic information , DIY setting
Battery: 48V10AH Hailong Downtube Lithium-ion Battery ;Approx 5 Hours charing Time ; Reliable quality
Charger: More than 1000 times cycle-life .Australia safety standard

Key feature:
*This 48V 500W motors Advantages :
Rotor Height: 24mm, More Powerful
Magnet Height: 24mm, More Powerful
Lamination/Silicon Steel Sheet: 0.35mm, Material 270 Higher Motor Efficiency
Nylon gear: 12mm, Better Quality Material, Higher torque, 20% Longer Using Life
Bearing: C&U Better quality, motor more quiet
Motor Axle: Salt Mist Axle, Anti-rust
Washers: Rust-resisting
Speed sensor: Integrated
* Built to the highest international standards, CE
* Alloy rim & stainless steel spoke & Aluminum alloy powerful controller
* Aluminum alloy powerful controller guarantee big current supply
* Brake Levers cut off the power supply to the motor safely
* Downtube battery 48V 10AH gives more power and runs more distance w' reliable quality .
* Charger with more than 1000 times cycle-life.Australia Safety standard .
* KT brand controller features :

Use Imitate Torque Control Mode To Help Achieve A Smooth Start-Up Of The Vehicle, The Power-Assist Drive Will Be Smooth And Natural.
Electric Power Assist Is With Fast Response And Always Consistent With The Riders Pedal Action To Achieve The Effect Of The Torque Boost.
With Multiple Protection Features Such As Stalled, Over-Current, Over-Temperature, Over-Voltage, Under-Voltage, Speed, Lack Of Phase And So On To Protect The Safety Of Vehicle Electronic Control Systems And Traffic.
*KT LCD5 Display functions: , battery level indicator (4 bars), 3 speed display modes (current, maximum, average), traction help up to 6km / h, odometer, trip duration display.

Package Include :
1) 26'' Rear Rim x1 (48V 500W motor)
2) Battery&Charger x1 (48V 10Ah Lithium Battery )
3) Controller x1
4) LCD Display x1
5) Pair e-Brake Levers x1
6) Thumb Throttle x1
7) PAS sensor x1 Set
8) Wiring cable x1
9) Protection line
10) Controller box
11) Installation manual

1)Professional installation skill needed .Please notice that basic tools will be required when install this DIY kit
2) 48V500W Motor is not path legal , this product is recommend for off road use only
3) Please check battery size and your bike's triangle frame , make sure battery fits your frame

We Also Recommend