Upgraded 80CC Motor ENGINE Motorised Petrol Push Bike Motorized Bicycle Kit

SKU:TJ042#
  • $190.00
  • Save $59
Tax included. Shipping calculated at checkout.

Only 17 left!

Please Be Advised Due To Higher Shipping Cost $20 Extra Will Be Charged For Customers From: 

NT, WA With Postcode Greater Than 62xx, And QLD With Postcode Greater Than 45xx

Upgraded 80cc 2 Stroke  Motorised Engine Kit for Push Bike Bicycle

This kit will allow you to turn your bicycle into a gasoline powered motorbike
1 Gallon of fuel runs 150 miles
The engine is designed to be pedal/chain started so you can start or stop the engine while riding
Speed up to 40mph. 

Product Specification
Engine Type:  2 stroke Single Cylinder Air-Cooled
Rated Power Rotary Speed:  2.5Kw/5000Rpm
Max Power: 3.5Kw/6000Rpm (5-6 Horsepower)
Fuel Ratio: 15:1 for the first 3 tanks ,25:1 after that 
Ignition: CDI
Start: Pedal Start
Tank Size: 2 Litres
Fuel Consumption: 2.5L/100Km

Speed : 40-55 km/Hr. Depends on rider's weight and road condition. 

Type Of Clutch: Dry Friction Pate
Fuel :  Unleaded PETROL Mixed with high grade 2 stroke motorcycle oil
Start : Pedal 

Package included

1 × Spark Plug  
1 × Chain Guard 
1 × Chrome Muffler  
1 × Drive Chain Idler 
1 × Push Clutch Lever 
1 × Standard Bike Chain
1 × 80CC 2-Stroke Engine (Silver)
1 × CD Ignition Assembly 
1 × High Quality Main Bearings 
1 × Black Teardrop Gas Tank (2L) 
1 × Low Profile Carburetor Assembly 
1 × Magneto With Kill Switch (on throttle) 
1 × 44 Tooth Chrome Sprocket With 9 Holes  
1 × Twist Throttle And Cable With Matching Grip
1 x U Shape Mounting Bracket 

Important :
  • Bicycle installed with 80cc engine kit is not legal to be used on road /bicycle path in Victoria - please check with local authority for other states.  It is  recommended for off-road or private property use only.
  • Must wear a  helmet when riding ! Do not use for night ride without lighting system.
  • Not suitable for bikes with  front frame wider than 50mm
  • Always wear a suitable helmet when riding. Not suggested for night use. If unavoidable, please make sure adequate lighting system is operating at night
  • Professional installation suggested , to install this kit you will need certain skills and tools. Please check the frame guide before purchase
  • Please note that this engine is the new generation, there are a small screw in the package which can be screwed straight on the arm of lock, no longer brass bit needed 
  • Use only high -grade 2 stoke motorcycle oil to ensure proper engine lubrication 

We Also Recommend