48V 1000W 15AH Electric Bike Conversion Kit - 26" Rear Hub Motor - For 26 Inch Bicycle Ebike E-bikesSKU:TJ330~TE174~TE508~TE512#
1. Electric bike conversion kit equipped with a 1000W Brushless Motor and 15.4AH Lithium Battery that reaches speeds up to 35-45km per hour and the range is 45-50km per charge by pedal assist.
2. Our electric bike conversion kit and electric bicycle kit contains thumb throttle and 8 magnets Pedal Assistant System. They are very helpful, even if on the steep hills place. You can ride it very comfortable.
3.Suitable for disc brake and V brake to use.
4.Rear fork width requirement:135-142mm .
5.Suitable for 26 inch bike tyres with width between 1.95-2.5''
6.Waterproof wiring connection system.
7.KT brand controller :
- Use Imitate Torque Control Mode To Help Achieve A Smooth Start-Up Of The Vehicle, The Power-Assist Drive Will Be Smooth And Natural.
- Electric Power Assist Is With Fast Response And Always Consistent With The Riders Pedal Action To Achieve The Effect Of The Torque Boost.
- With Multiple Protection Features Such As Stalled, Over-Current, Over-Temperature, Over-Voltage, Under-Voltage, Speed, Lack Of Phase And So On To Protect The Safety Of Vehicle Electronic Control Systems And Traffic.
|Item||Full 48V1000W 15Ah 26'' rear hub electric bike conversion kit|
|Motor||48V 1000W brushless gear hub motor|
|Battery||48V15.4AH lithium battery in rear rack frame ;Tail Light|
|Battery case||Rear rack battery frame|
|Rim||Rear 26'' aluminum double wall.12g stainless steel spokes|
|Mode||Pedal assist or thumb throttle|
|Display||KT LCD5 ;DIY setting|
|Brake||WUXING e-brake levers with cut off|
|Controller||KT brand 48V Controller .Maximum current rate: 30±1A|
|PAS Sensor||8 magnets|
|Charging time||4-6 hours|
|Battery charger||110V-240V Input;Australian Safety standard .|
|Speed||Up to 35-45km/h ,top speed varies based on bicycle weight and configuration.|
1) 26'' Rear Rim x1 (1000W motor)
2) Battery&Charger x1 (48V 15.4Ah Lithium Battery )
10) Controller bag .
11) Installation Manual
Note:1)Please be advised that in some jurisdictions or state it is for riding on private properties only! Please make sure you check with your local authority before purchase. We recommend for off road use only!
2) Profession installation recommend .
3) Basic tool will be required when install this kit
4)If your bike has hydraulic mechanical brake , you can buy a brake cut off sensor separately from this ebay listing link: https://www.ebay.com.au/itm/184243978166
5)Please noted that the hub will only suit screw on freewheel ( normally up to 7 gears)
Sample Bike After Installation
We Also Recommend
Upgraded 80CC Motor ENGINE Motorised Petrol Push Bike Motorized Bicycle Kit
415H Drive Chain 2 Stroke 48cc 49cc 60cc 66cc 80cc Motorized bicycle Push Bike
High Performance 100CC > 80CC MOTOR ENGINE KIT for MOTORISED BICYCLE PUSH BIKE
26" 36V 350W Front Wheel Hub Motor - Pedal Assist Electric Bike/Bicycle Conversion Kit Ebike E-bike Push Bike